The shell part
First of all, the shell consists of a piece of wood and three cardboards, we painted in the interior of the cardboard ( the corlor of blue has different deep).We made a 8 cm tall box at the bottom of the wood to hide wires.
The inside part
In this part, in order to do more beautifully, we try our best to set the Christmas Eve to do the most detailed.
The first step,we used paper and scissors, cut out a stereoscopic house (using a heavy cardboard, house can be more robust to the last). The second step,used different colors of clay, cut into small rectangular glued on the paper house, as the windows of the house, tiles, etc.
The Christmas tree
Prepare a few pieces of red square papers and a pair of scissors, make the Christmas tree according to the tutorial.
Shadow puppets projector
The first step, make Piying play, with laser cutting machine to cutting out two sets of the same pattern of Santa Claus driving the elk flying over the sky.
The second step, with white transparent plate production projection screen, as the moon. (must cut out of a round moon at the cardboard and stick on the white board at the position).
The third step, make the projection plane, use a flashlight as light source, the cross skeleton to hang Shadow play, installation of motor under the shelf, make the shelf rotating, Santa Claus could sometimes have and sometimes not have . Specific production reference pictures.
The letter of SEEED
We used 3 cm thick EVA cut out of them.
The wood of Merry Christmas
Use laser cutting machine for cutting out it and hang with ropes on the roof.
Using Seeduino GPRS to build a bluetooth speaker, the demo code is on github.
Made the snow field with the white foam board. Make the two snowman with clay.With a cardboard cut out of other trees.