Frame, cut out all structural parts with laser cutter
Download files for cutting.
Note Seeed also provides manufacturing service for customers all around the world. You can find more info at http://www.seeedstudio.com/service/.
Make sure you have downloaded files for cutting which mentioned at Material Required section. Then start cutting. You will get following parts as follows.
Cut a circle of PMMA board:
Figure of cutting process:
Tear down tapes on PMMA board and install screws to fix all board, from top to bottom itwill PMMA board, PET sheet, PMAA board. The screw type would be M2(4mm).
HD image to show how to all modules connected, fix all modules to boards with a glue gun.
Add your favorite music tracks to microSD card and name it as 001xxx.mp3, 002xxx.mp3, and so on.
Note that you can only file start with Arabic numbers and xxxindicate your file name, put tracks directly into microSD card rather than into folders.
Download codes and flash it to Seeeduino Lotus.
Note you should add library files at following site:
You can make your favorite video content and put it inside make this project more special for your love ones.