This is a toy that you can change the Minnie mouse’s hair clip, It’s based on the Color RGB model, when you’re sliding the Grove – Silde Potentioment, the color would be changed too.
The RGB color model is an additive color model in which red, green, and blue light are added together in various ways to reproduce a broad array of colors. The name of the model comes from the initials of the three additive primary colors, red, green, and blue.
I want to tell little friends what Color RGB model is and what would happened when you added RGB light together. So I made this toy.
By the time you’re done with the project you will reap the following experience:
Now, let’s get started.
I made a shell to fix the Grove Modules and draw a Minnie Mouse using plywood. Then my friend from seeed help me cutting the plywood. I guess you don’t have a laser cutting at home, you can find some in the hacker space near from you easily. If there's no hacker space nearby, you can try the Laser Cutting Service supply by Seeed.
You can download my drawing shown as below by click here.
Now, you’ll need two pieces of Plywood (3mm 40cm*60cm), and cut the plywood according by the drawing that you have already downloaded.
Then you should connect the Grove Modules to the plywood using screws and nuts.
At last, connectGrove Modules to baseshield and fix the two pieces of plywood using screws andnuts.
We assume you have connected your Arduino board and computer well with USB.
As you can see, the Minnie mouse’s hair clip color can be changed by the three Grove - Silde Potentioments.
This project is made as an Open Source Project. It's a starting point. Let your creativity go wild with the mechanical, electrical and software design. Make the demo your own. Decorate it. Improve the work. No matter what, write a recipe about it.
To share and progress together.