To get in bluetooth controlling mode.
The picture above shows the bluetooth controller you’re controlling on the beaglebone.
Open your bluetooth earphone or other audio bluetooth device and get into the bluetooth searching mode.
To search the bluetooth device around your beaglebone.
Here I can see my device’s name “Q7”, and the signal I want to connect is “1C:52:16:06:72:71”. you’d better know your device’s name before scanning.
To turn off the scanner and start to connect the signal you want to.
To pair your device.
Now you find your device is pairing successfully.
To trust your device.
To connect your device
Congra! our device is connected to the beaglebone!
To quit the bluetooth control mode.
Then plug your U disk with music file inside.(the file in my U disk is Fix you.mp3)
To load the U disk.
Now the U disk path is in the /mnt
To play the music.(if there is space in the name of your music file,you need to type it as”\ ”)
Now you can enjoy the music!!