I guess you don't have a laser cutting at home, you can find some in the hacker space near from you easily. If there's no hacker space nearby, you can try theLaser Cutting Service supply by Seeed.
First let's prepare some materials:
You can down load the 2D file here.
Prepare for material:
And a few steps:
Step9: Use the laser cutting to cut out some clouds and rectangules
Step10: Put the cloud in the rectangule1
Step11: Join them together with Glue gun
You han done the first floor.
Step12:Top is screws and Bottom is Stand1 with first floor.
Step14:Put Rectangle2 on the Stand1
Step15:Put Stand2 in Rectangle2
Then you han done the second floor.
Step17:CNC a water box
Step18:Put the box under the second floor with the allen screws.
Then you got the third one:Cloud Part
You need to get soft water pipe, you can buy it in the Hardware Store, or eBay maybe.
Just put it to the back of the Fence, and tight with 2 screw.
It's no a very easy step to go. You need to do some soldering here, if you had never solder something, why not just start here.
First of all, let's cut 2 acrylic, download the file here, or you can check it in the attachment.
In the end of this step, we will get a control center, which looks like a small pc host. You can refer to image 11 and 12.
First we need to laser cut some, the acrylic top and bottom. Click here to download 2d file.
Then the hardest part is coming. We need to paste some interface on the bottom acrylic, they are
Put them on the right place just as shown in image 3 and 4. Pitch them om the bottom acrylic with some AB glue.
Then you should solder some cable on each connect, don't know the connection? Never mind, will tell you soon. As shown in image 5.
Connection of GrovePi please refer to image 13.
Connection of Hercules please refer to image 14.
After the above steps, we had made a fence and acrylic case. Now we are going to install some sensor and cable on it.
As it's very hard to describe the details, so please refer to the image, as a MAKER, I think you can make it out :XD
The operating system on Raspberry Pi 2 is Windows 10 for IoT Core. If this is your first time to run Windows 10 for IoT Core on your device, please clickhttp://ms-iot.github.io/content/en-US/GetStarted.... here to get more information.
This project is made as an Open Source Project. You can download the demo code from GitHub.
Click “Download ZIP” just as the picture below shows. And decompress it to any folders.
Double click on the “Rpi.sln”. Then you’ll find there’re 3 projects in the Solution Explorer. Choose the “RPI(Windows Universal)” project, Click “Debug ” -> “Rpi Properties” as shown in Image 2.
Then according to the below content of the red box marked to configure your project. Please note that the “Remote machine” IP address should be your own. (Image 4)
After all of the configuration is set up, Click “Build Solution”, when it’s finished built click “Deploy Solution”(Image 5)
At last, you’ll find the code is running on your Raspberry.
If you want to let your device startup automatically, you should remotely configure and manage the device using Windows PowerShell. PowerShell is a task - based command - line shell and scripting language , if you want more information click here.
Please follow this link to see how to set the code as the Startup App.
Hercules Motor Controller is a high current motor drive control board. including micro controller processor, motor drive circuit, charging circuit and protection circuit. It features a complete solution to power supply, control and drive.
Hercules is compatible with Arduino, you can code it with Arduino IDE.
First of all, download the code here.
About the use of Hercules, please refer to wiki of Hercules.
Never heard about Arduino? Oh, there's long way to go, but never mind, it's not that hard to study.
Finally, put a plate of plant into the box, better the water-like plant, or it may kill the plant with so many water.
Put some water into the box, press the button, then something magic will happen.
At the last, HAPPY HACKING.